CORNING EDGE-10U-PRH Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Involucro CORNING EDGE-10U-PRH. CORNING EDGE-10U-PRH 8. Edge port replication housing

TPA-4784

NOTE:

If installing less than eight modules in the EDGE™ tray, a blank module cover (EDGE-CPCVR-PRH),

purchased separately, (shown in the inset in Figure 5) can be installed over two module positions in the

EDGE tray.

Install EDGE8® or LC Adapter Panel

The panels can be mounted either horizontally or vertically in the housing to mimic the layout of the switch being

replicated.

Step 1:

Install the EDGE8 tray in the orientation desired and secure each end with the captive fastener.

Install blank panels (EDGE-BLNK-PRH) into the EDGE8 tray, purchased

separately, in the unused positions, if desired.

TPA-5443

NOTE:

If installing less than twelve modules in the EDGE8® tray, a blank-outmodule (EMOD8-BLANK), purchased

separately, (shown in the inset in Figure 6) can be installed into each unused position in the EDGE8 tray.

Module cover

Standard Recommended Procedure 003-991-AEN | Issue 5 | January 2021 | Page 3 of 8

Panel cover

Figure 5

Figure 6