Makita 5477NB Informazioni tecniche - Pagina 3
Sfoglia online o scarica il pdf Informazioni tecniche per Utensile elettrico Makita 5477NB. Makita 5477NB 8. Hypoid saw 185mm (7-1/4")
Anche per Makita 5477NB: Manuale di istruzioni (12 pagine)
Stampa la pagina
R
epair
[3] DISASSEMBLY/ ASSEMBLY OF BASE (cont.)
DISASSEMBLING
2) Remove the other Bow stop ring E-12, Lever plate, M8-13 Hex nut, Flat washer 8 (small) and M8x24 Cap square neck
bolt on the angular guide of Base. (Fig. 4)
3) Remove M8 Flat head screw on the angular guide. (Fig. 5) Base can be removed.
Fig. 4
angular guide
of Base
M8x28 Cap
square neck bolt
Flat washer 8 (small)
Lever plate
ASSEMBLING
Do the reverse of the disassembling steps.
Note: 1) Be sure to set Flat washer 8 (large) in place when assembling Depth guide and the relative parts.
2) Secure Lever plate with Bow stop ring E-12. Bow stop ring E-12 isn't reversible when assembled.
Be sure to face the curved shape toward outside. (Fig. 6)
Fig. 6
Correct
Bow stop ring E-12
M8-13 Hex nut
Flat washer 8
Inside (to Motor section)
[4] DISASSEMBLY/ASSEMBLY OF GEAR SECTION
DISASSEMBLING
1) Remove Base from Motor section.
2) Safety cover and Spacer can be removed by extracting Retaining ring S-42 with 1R003. (Fig. 7) Spacer and Tension
spring 4 can also be removed. (Fig. 8)
3) Remove M5x18 Pan head screws (2pcs.) and M6x16 Pan head screw. (Fig. 8)
Grip, Hook assembly and Cover complete can be removed from Gear housing complete.
Fig. 7
1R003
Safety cover
Retaining ring S-42
Fig. 5
M8-13
Hex nut
M8 Hex. nut
Bow stop
ring E-12
Spring washer 8
Outside
Curved
Lever plate
Fig. 8
M6x16 Pan head screw
Tension spring 4
Retaining ring S-42
Flat washer 8 (small)
Wrong
(The curved shape
faces inside.)
Curved
Grip
Spacer
Safety cover
P 3/ 8
Base
M8 Flat head screw
O ring 12
Stopper plate
M5x18 Pan head
screw
Hook assembly
(optional accessory)
Cover complete