Makita 5477NB 기술 정보 - 페이지 3

{카테고리_이름} Makita 5477NB에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5477NB 8 페이지. Hypoid saw 185mm (7-1/4")
Makita 5477NB에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

epair

[3] DISASSEMBLY/ ASSEMBLY OF BASE (cont.)

DISASSEMBLING

2) Remove the other Bow stop ring E-12, Lever plate, M8-13 Hex nut, Flat washer 8 (small) and M8x24 Cap square neck

bolt on the angular guide of Base. (Fig. 4)

3) Remove M8 Flat head screw on the angular guide. (Fig. 5) Base can be removed.

Fig. 4

angular guide

of Base

M8x28 Cap

square neck bolt

Flat washer 8 (small)

Lever plate

ASSEMBLING

Do the reverse of the disassembling steps.

Note: 1) Be sure to set Flat washer 8 (large) in place when assembling Depth guide and the relative parts.

2) Secure Lever plate with Bow stop ring E-12. Bow stop ring E-12 isn't reversible when assembled.

Be sure to face the curved shape toward outside. (Fig. 6)

Fig. 6

Correct

Bow stop ring E-12

M8-13 Hex nut

Flat washer 8

Inside (to Motor section)

[4] DISASSEMBLY/ASSEMBLY OF GEAR SECTION

DISASSEMBLING

1) Remove Base from Motor section.

2) Safety cover and Spacer can be removed by extracting Retaining ring S-42 with 1R003. (Fig. 7) Spacer and Tension

spring 4 can also be removed. (Fig. 8)

3) Remove M5x18 Pan head screws (2pcs.) and M6x16 Pan head screw. (Fig. 8)

Grip, Hook assembly and Cover complete can be removed from Gear housing complete.

Fig. 7

1R003

Safety cover

Retaining ring S-42

Fig. 5

M8-13

Hex nut

M8 Hex. nut

Bow stop

ring E-12

Spring washer 8

Outside

Curved

Lever plate

Fig. 8

M6x16 Pan head screw

Tension spring 4

Retaining ring S-42

Flat washer 8 (small)

Wrong

(The curved shape

faces inside.)

Curved

Grip

Spacer

Safety cover

P 3/ 8

Base

M8 Flat head screw

O ring 12

Stopper plate

M5x18 Pan head

screw

Hook assembly

(optional accessory)

Cover complete