Makita 5477NB 기술 정보 - 페이지 4

{카테고리_이름} Makita 5477NB에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5477NB 8 페이지. Hypoid saw 185mm (7-1/4")
Makita 5477NB에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

epair

[4] DISASSEMBLY/ ASSEMBLY OF GEAR SECTION (Cont.)

DISASSEMBLING

4) Gear housing complete is secured with M5x35 Pan head screws (2pcs.) on Spindle lock button side and with the other

M5x35 Pan head screws (2pcs.) on Blade case side.

First, remove M5x35 Pan head screws (2pcs.) on Spindle lock button side. (Fig. 9)

5) Bearing box can be removed by removing M5x18 Pan head screws (3pcs.). (Fig. 10)

6) Put Gear housing complete onto the vessel for collecting lubricant oil with its Bearing assembly side down.

Hypoid gear 36, Flat washer 12 and Lubricant oil are fallen down from Gear housing complete. (Fig. 11)

Note: Pay attention not to lose Woodruff key in this step.

7) Remove Depth guide and remove Brush holder cap.

Carbon brush on Blade case side can be removed from Motor housing complete. (Fig. 12)

8) Remove M5x35 Pan head screws (2pcs.) on Blade case side. (Fig. 12)

9) Temporarily fix Gear housing complete to Motor housing complete with M5x35 Pan head screws (2pcs.) screwed

halfway in the screw holes as illustrated in Fig.13. Strike the screws head gently with plastic hammer.

Gear housing complete is removed from Motor housing complete as illustrated in Fig.14.

Fig. 9

Spindle lock button

Fig. 11

Hypoid gear 36

Flat washer 12

Vessel for collecting

Lubricant oil

Fig. 13

M5x35 Pan head

screw

Gear part of

Armature

Spindle

Lubricant oil

Woodruff key

Spindle

Fig. 14

Fig. 10

M5x18 Pan

head screw

(Ball bearing 6001ZZ comes with this bearing box.)

Fig. 12

Carbon brush

Brush holder cap

Motor housing complete

Armature

Gear housing complete

P 4/ 8

Hypoid gear 36

Bearing box

M5x35 Pan head

screw