CORNING UAT3 Manuale di istruzioni per l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Strumenti CORNING UAT3. CORNING UAT3 18.

WARNING: Filling compound remover contains petroleum

distillates. Harmful or fatal if swallowed. DO NOT INDUCE

VOMITING. Call a physician immediately.

2.5

Fiber Precautions

CAUTION: Cleaved or broken glass fibers are very sharp and

can pierce the skin easily. Do not let these pieces of fiber stick

to your clothing or drop in the work area where they can

cause injury later. Use tweezers to pick up cleaved or broken

pieces of glass fibers and place them on a loop of tape kept

for that purpose alone. Good housekeeping is very important.

2.6

Laser Precautions

WARNING: Never look directly into the end of a fiber that

may be carrying laser light. Laser light can be invisible and can

damage your eyes. Viewing it directly does not cause pain. The

iris of the eye will not close involuntarily as when viewing a

bright light. Consequently, serious damage to the retina of the

eye is possible. Should accidental eye exposure to laser light

be suspected, arrange for an eye examination immediately.

Kit Contents, Tools, and Materials

3.1

The UAT3 kit has the following contents:

• UAT3 tool (P/N UAT3-000)

• UAT3 tool crank handle (separate from the tool)

(P/N 3230079-01)

• 3/8-in open-end wrench (p/n 3222008-01)

• Plastic gauge card (P/N 3230080-01)

• Small screwdriver (P/N 100302-01)

• Replacement blades (4) (P/N UAT3-BLADES)

• Replacement springs (2) (P/N NAT3-SPRINGS)

• UAT3 operating manual (SRP-004-074)

Standard Recommended Procedure 004-074 | Issue 12 | May 2017 | Page 4 of 18