Makita 9207SPB Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 9207SPB. Makita 9207SPB 12. Polisher
Anche per Makita 9207SPB: Manuale di istruzioni (17 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (8 pagine)

Stampa la pagina

ADDITIONAL SAFETY RULES

Always use eye and ear protection. Other per-

sonal protective equipment such as dust mask,

gloves, helmet and apron should be worn.

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Accessories must be rated for at least the speed

recommended on the tool warning label. Wheels

and other accessories running over rated speed can

fly apart and cause injury. Maximum operating

speed of accessories should be higher than the

highest no load speed marked on the tool's name-

plate.

Check the backing pad carefully for cracks,

damage or deformity before operation. Replace

cracked, damaged or deformed pad immedi-

ately.

Check that the workpiece is properly supported.

Hold the tool firmly.

Keep hands away from rotating parts.

Make sure the abrasive disc or wool bonnet is

not contacting the workpiece before the switch

is turned on.

When sanding metal surfaces, watch out for fly-

ing sparks. Hold the tool so that sparks fly away

from you and other persons or flammable mate-

rials.

10. Do not leave the tool running. Operate the tool

only when hand-held.

SAVE THESE INSTRUCTIONS

11. Pay attention that the wheel continues to rotate

after the tool is switched off.

12. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

13. If working place is extremely hot and humid, or

badly polluted by conductive dust, use a short-

circuit breaker (30 mA) to assure operator

safety.

14. Do not use the tool on any materials containing

asbestos.

15. Do not use water or grinding lubricant.

16. Ventilate your work area adequately when you

perform sanding operations.

17. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

18. Always use the correct dust mask/respirator for

the material and application you are working

with when sanding.

19. Ensure that ventilation openings are kept clear

when working in dusty conditions. If it should

become necessary to clear dust, first discon-

nect the tool from the mains supply ( use non

metallic objects ) and avoid damaging internal

parts.

ENB047-6