Makita 9207SPB Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 9207SPB. Makita 9207SPB 12 страниц. Polisher
Также для Makita 9207SPB: Руководство по эксплуатации (17 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц)
Печатать страницу
ADDITIONAL SAFETY RULES
1.
Always use eye and ear protection. Other per-
sonal protective equipment such as dust mask,
gloves, helmet and apron should be worn.
2.
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
3.
Accessories must be rated for at least the speed
recommended on the tool warning label. Wheels
and other accessories running over rated speed can
fly apart and cause injury. Maximum operating
speed of accessories should be higher than the
highest no load speed marked on the tool's name-
plate.
4.
Check the backing pad carefully for cracks,
damage or deformity before operation. Replace
cracked, damaged or deformed pad immedi-
ately.
5.
Check that the workpiece is properly supported.
6.
Hold the tool firmly.
7.
Keep hands away from rotating parts.
8.
Make sure the abrasive disc or wool bonnet is
not contacting the workpiece before the switch
is turned on.
9.
When sanding metal surfaces, watch out for fly-
ing sparks. Hold the tool so that sparks fly away
from you and other persons or flammable mate-
rials.
10. Do not leave the tool running. Operate the tool
only when hand-held.
SAVE THESE INSTRUCTIONS
4
11. Pay attention that the wheel continues to rotate
after the tool is switched off.
12. Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
13. If working place is extremely hot and humid, or
badly polluted by conductive dust, use a short-
circuit breaker (30 mA) to assure operator
safety.
14. Do not use the tool on any materials containing
asbestos.
15. Do not use water or grinding lubricant.
16. Ventilate your work area adequately when you
perform sanding operations.
17. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
18. Always use the correct dust mask/respirator for
the material and application you are working
with when sanding.
19. Ensure that ventilation openings are kept clear
when working in dusty conditions. If it should
become necessary to clear dust, first discon-
nect the tool from the mains supply ( use non
metallic objects ) and avoid damaging internal
parts.
ENB047-6