Brizo Charlotte T60485 Manuale di istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Cucina e accessori; sanitari per il bagno Brizo Charlotte T60485. Brizo Charlotte T60485 20. Valve trim
Anche per Brizo Charlotte T60485: Istruzioni per l'installazione e manuale d'uso (20 pagine)

Brizo Charlotte T60485 Manuale di istruzioni per l'installazione
60 Series Installation
Showerhead and Tub Spout Installation
2
NOTE: It is suggested that you anchor your shower arm and tub spout
elbows or water lines.
2
A.
RP70908s
(3) = 3/8" - 1/2" (9.5 mm - 12.7 mm)
FOR TUB SPOUT INSTALLATION:
Install 1/2" (13 mm) threaded pipe nipple (1) to
extend past finished wall (2) per dimension (3).
Connection of deck mount spouts to in–wall
valves is not recommended. Neither is the use
of hand showers connected to tub spouts in a
tub/shower push button diverter combination, or
hand showers connected in lieu of a tub spout
to a tub / shower valve.
Piping between valve body and tub spout must
be a minimum of 1/2" (13 mm) copper pipe
or 1/2" (13 mm) iron pipe in a straight drop
no less than 8" (203 mm) but no more than
18" (457 mm) long with only one iron pipe or
copper 90 degree elbow to the tub spout nipple.
1
3
4
1
3
2
FOR SHOWERHEAD INSTALLATION:
Connect top outlet (1) to shower arm (2) with
proper fittings. Apply Teflon
on both ends of showerarm. To prevent damage
to finish on shower arm, insert wall end of shower
arm into shower flange (3) before screwing arm
into riser connection. Thread showerhead (4) onto
shower arm. Do not overtighten showerhead.
B.
3
Install a 1/2" threaded pipe nipple to extend
beyond the finished wall 3/8" to 1/2". Apply Teflon
tape to thread on pipe nipple and screw brass
adapter (1) securely onto nipple. Install set screw
on bottom of spout (2) making sure it is not
sticking through to the inside opening where it
could interfere with the assembly. Slide tub spout
over the adapter and tighten set screw, on bottom
of spout, against the adapter. Note: This spout
utilizes a pull down diverter mechanism. To
divert from spout to shower, pull down on
spout tip (3).
4
tape to pipe threads
®
2
1
®