Lexmark C925 Riferimento rapido - Pagina 2

Sfoglia online o scarica il pdf Riferimento rapido per Stampante Lexmark C925. Lexmark C925 10. Setup sheet
Anche per Lexmark C925: Manuale dell'amministratore (20 pagine), Manuale dell'amministratore (12 pagine), Manuale di connessione (7 pagine), Nota di rilascio (4 pagine), Manuale dell'amministratore (13 pagine), Manuale di manutenzione (15 pagine), Manuale (14 pagine), Manuale dell'amministratore (12 pagine), Paper Manual (3 pagine), Mappa del menu (2 pagine), Manuale di trasloco (2 pagine), Manuale delle forniture (2 pagine), Manuale informativo (1 pagine), Manuale dei difetti di stampa (1 pagine), Installazione (2 pagine), Riferimento rapido (12 pagine), Servizio di formazione (18 pagine)

Stampa la pagina
Lexmark C925 Riferimento rapido
3
Squeeze the length guide tabs together, and then slide the length
guide to the correct position for the paper size being loaded.
4
Flex the sheets back and forth to loosen them. Do not fold or
crease the paper. Straighten the edges on a level surface.
5
Load the paper stack with the recommended print side faceup.
Load the paper in either the long-edge or short-edge orientation
as described at the beginning of this section.
Notes:
•
Load sizes larger than A4 in the short-edge orientation.
•
Make sure the paper is below the maximum fill line located
on the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
Long-edge orientation
Short-edge orientation
6
Adjust both the width and length guides to lightly touch the edge
of the paper stack. Make sure the paper fits loosely in the tray, lies
flat, and is not bent or wrinkled.
7
Lock the width guide.
2
8
Insert the tray.
9
From the printer control panel, set the Paper Size and Paper Type
for the tray based on the paper you loaded.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print
media, such as transparencies, labels, card stock, and envelopes. It
can be used for single-page or manual printing, or as an additional
tray.
The multipurpose feeder can hold approximately:
•
2
50 sheets of 75-g/m
(20-lb) paper
•
10 envelopes
•
20 transparencies
Note: Do not add or remove paper or specialty media when the
printer is printing from the multipurpose feeder or when the printer
control panel indicator light is blinking. Doing so may cause a jam.
1
Pull down the multipurpose feeder door.