Gardena RM 380 Manuale di istruzioni per l'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Tagliaerba Gardena RM 380. Gardena RM 380 9. Accu-motormäher
Anche per Gardena RM 380: (tedesco) Istruzioni per l'uso (10 pagine)
Stampa la pagina
Maintenance
7.4 Adjusting the Cutting Tool
at a Later Stage (Fig. H)
Note : Ensure that all nuts, bolts
The cutting tool of your Cordless
and screws are tight and that
Motor Mower was set at an opti-
the mower is in good working
mum setting before leaving our
order. For safety reasons, allow
factory. However, if the cut is not
all worn out and damaged parts
clean after using your mower for
to be exchanged by GARDENA
a longer period of time, please
Service or authorised specialist
correct the setting of the lower
dealers.
blade as follows :
To avoid injury and damage to
1. Switch off the Motor Mower
the mower we recommend you
and remove the key from the
have your mower checked in
socket to prevent starting the
autumn so that it is ready and
Motor Mower unintentionally.
safe to use next season.
2. Push the supplied thickness
gauge
Storage
between one blade of the
Store your Accu Cordless
cutting cylinder and the lower
Motor Mower in a dry, cool
blade.
place where it is protected
3. Turn the hexagon thread bolt
S
from frost.
with a 10 mm fork wrench
The mower should be stored
to the right until the thickness
out of the reach of children.
gauge closes slightly. Repeat
this on the right hand side of
Tip : The Accu discharges less
the mower.
when stored at cooler tempera-
tures.
8. Disposing of and Recycling Accus
Pb
The
After their lifetime have expired,
Accu
they may not be disposed of as
contains
normal house rubbish, but must
lead cells.
be disposed of properly.
9. Advice for Proper Use / Safety Instructions
Checks before
foreign objects (e.g. stones)
A
each operation
during work.
Inspect the unit before each
The cutting cylinder and the
use. Do not use the Accu
lower blade must be checked
Cordless Motor Mower if safety
regularly for damage and prop-
devices (safety handle; safety
erly repaired if necessary.
cover) and / or the cutting
Cutting tools must only be ex-
cylinder are damaged or worn.
changed by GARDENA Service
Never operate the unit with
or an authorised specialist
the safety devices by-passed
dealer.
or missing.
Inspect the area to be cut
Proper use /
A
before beginning work.
responsibility
Remove any foreign objects
This Accu Cordless Motor
(e.g. stones) from the area.
Mower can cause serious
Check the working area for
injuries!
20
4. Turn the cutting cylinder to
test the setting. None of the
5 blades of the cylinder must
touch the lower blade.
Warning ! Handle the
A
cutting tool carefully
to avoid cutting yourself.
Wear appropriate gloves to
protect your hands.
5. When you have adjusted the
cutting tool test it using a piece
of newspaper (Fig. I).
6.
Important ! Pay atten-
A
tion to the + / – markings
and the colour markings of
R
on the left hand side
the receptacle for the tabs.
Push the red tab receptacle
on the tab labelled with a plus
sign (+) and the black tab
receptacle on the tab labelled
with a minus sign (–).
Ensure the tab receptacles
are fitted correctly.
Please return the Accu to a
GARDENA dealer or send them
directly to one of the GARDENA
Service Centres listed on the
rear.
You are responsible for the
safety of the working area.
To prevent injuries, never start
the motor when the Mower is
tipped.
Only use the Cordless Motor
Mower for the purposes speci-
fied in these instructions.
Only work when visibility is
good.
Guide the mower at a walking
pace only.
Only insert the key into the
socket when you plan to start
working with the Motor Mower.
G
Familiarise yourself with the
surroundings of your work-
ing area. Check for possible
risks which might be not
audible due to the noise of
the machine.
Wear sturdy shoes and long
trousers to protect your legs.
Keep fingers and feet away
from the cutting tool.
Make sure that there are no
other people (especially chil-
dren) or animals anywhere
near the working area.
Ensure that you have a se-
cure foothold when working.
Attention! Take extra care
when walking backwards.
You may stumble !
If, in spite of this, you come
into contact with any obstruc-
tion when cutting, turn off the
mower. Remove the key from
the socket. Remove the object
then check the mower for
damage and have it repaired
if necessary.
10. Faults
The following table contains the problems most frequently occurring and shows how to remedy them.
Problem
Abnormal noise.
Clattering in the unit.
Metal-like hammering noises.
Motor will not start.
Motor turns off.
Notes on Safety
A
A
Interruptions of work
Regarding Accu /
Danger of Fire
Never leave the Cordless motor
Mower unattended at the work-
Never charge the Accu after
ing area.
having been heated up by
If you interrupt your work store
operation or sun. Let cool
the mower in a safe place.
down first.
When you interrupt work to
Never expose the Accu to
move to another working area,
direct sunlight while charging.
always switch off your Cordless
Never charge the Accu any-
Motor Mower and remove the
where near acids and easily
key from the socket.
inflammable materials.
Danger of fire !
A
Check the environment
Only use the Accu for the
appliances intended.
Never use the unit when it is
raining or in damp or wet areas.
Do not throw the used Accu
into fire under any circum-
Do not operate your Cordless
stances. Danger of fire !
Motor Mower near swimming
pools or garden ponds.
Never bridge the contacts
in the Accu. Danger of short
Please observe the prescribed
circuits and fire.
local quiet times.
Keep the charger in a dry
place.
Possible cause
Remedy
Motor fixing screws or
Tighten screws.
mower casing loose.
Foreign body blocking the
Turn off the mower.
cutting cylinder.
Remove the key from the socket.
Remove the foreign body.
Tab on Accu loose.
Open the cover
the tab receptacle onto the tab.
Key not inserted.
Insert the key into the socket.
Circuit breaker has been
Wait approx. 5 -10 minutes then
triggered.
turn on the motor again.
Blocked by foreign body.
Switch off the motor.
Blocking protection activated.
Remove the key from the socket.
Remove the foreign body.
G
C
and push
21