Gardena RM 380 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kosiarka Gardena RM 380. Gardena RM 380 9 stron. Accu-motormäher
Również dla Gardena RM 380: (Niemiecki) Instrukcja obsługi (10 strony)

Drukuj stronę

Maintenance

7.4 Adjusting the Cutting Tool

at a Later Stage (Fig. H)

Note : Ensure that all nuts, bolts

The cutting tool of your Cordless

and screws are tight and that

Motor Mower was set at an opti-

the mower is in good working

mum setting before leaving our

order. For safety reasons, allow

factory. However, if the cut is not

all worn out and damaged parts

clean after using your mower for

to be exchanged by GARDENA

a longer period of time, please

Service or authorised specialist

correct the setting of the lower

dealers.

blade as follows :

To avoid injury and damage to

1. Switch off the Motor Mower

the mower we recommend you

and remove the key from the

have your mower checked in

socket to prevent starting the

autumn so that it is ready and

Motor Mower unintentionally.

safe to use next season.

2. Push the supplied thickness

gauge

Storage

between one blade of the

Store your Accu Cordless

cutting cylinder and the lower

Motor Mower in a dry, cool

blade.

place where it is protected

3. Turn the hexagon thread bolt

from frost.

with a 10 mm fork wrench

The mower should be stored

to the right until the thickness

out of the reach of children.

gauge closes slightly. Repeat

this on the right hand side of

Tip : The Accu discharges less

the mower.

when stored at cooler tempera-

tures.

8. Disposing of and Recycling Accus

The

After their lifetime have expired,

Accu

they may not be disposed of as

contains

normal house rubbish, but must

lead cells.

be disposed of properly.

9. Advice for Proper Use / Safety Instructions

Checks before

foreign objects (e.g. stones)

each operation

during work.

Inspect the unit before each

The cutting cylinder and the

use. Do not use the Accu

lower blade must be checked

Cordless Motor Mower if safety

regularly for damage and prop-

devices (safety handle; safety

erly repaired if necessary.

cover) and / or the cutting

Cutting tools must only be ex-

cylinder are damaged or worn.

changed by GARDENA Service

Never operate the unit with

or an authorised specialist

the safety devices by-passed

dealer.

or missing.

Inspect the area to be cut

Proper use /

before beginning work.

responsibility

Remove any foreign objects

This Accu Cordless Motor

(e.g. stones) from the area.

Mower can cause serious

Check the working area for

injuries!

4. Turn the cutting cylinder to

test the setting. None of the

5 blades of the cylinder must

touch the lower blade.

Warning ! Handle the

cutting tool carefully

to avoid cutting yourself.

Wear appropriate gloves to

protect your hands.

5. When you have adjusted the

cutting tool test it using a piece

of newspaper (Fig. I).

Important ! Pay atten-

tion to the + / – markings

and the colour markings of

on the left hand side

the receptacle for the tabs.

Push the red tab receptacle

on the tab labelled with a plus

sign (+) and the black tab

receptacle on the tab labelled

with a minus sign (–).

Ensure the tab receptacles

are fitted correctly.

Please return the Accu to a

GARDENA dealer or send them

directly to one of the GARDENA

Service Centres listed on the

rear.

You are responsible for the

safety of the working area.

To prevent injuries, never start

the motor when the Mower is

tipped.

Only use the Cordless Motor

Mower for the purposes speci-

fied in these instructions.

Only work when visibility is

good.

Guide the mower at a walking

pace only.

Only insert the key into the

socket when you plan to start

working with the Motor Mower.

Familiarise yourself with the

surroundings of your work-

ing area. Check for possible

risks which might be not

audible due to the noise of

the machine.

Wear sturdy shoes and long

trousers to protect your legs.

Keep fingers and feet away

from the cutting tool.

Make sure that there are no

other people (especially chil-

dren) or animals anywhere

near the working area.

Ensure that you have a se-

cure foothold when working.

Attention! Take extra care

when walking backwards.

You may stumble !

If, in spite of this, you come

into contact with any obstruc-

tion when cutting, turn off the

mower. Remove the key from

the socket. Remove the object

then check the mower for

damage and have it repaired

if necessary.

10. Faults

The following table contains the problems most frequently occurring and shows how to remedy them.

Problem

Abnormal noise.

Clattering in the unit.

Metal-like hammering noises.

Motor will not start.

Motor turns off.

Notes on Safety

Interruptions of work

Regarding Accu /

Danger of Fire

Never leave the Cordless motor

Mower unattended at the work-

Never charge the Accu after

ing area.

having been heated up by

If you interrupt your work store

operation or sun. Let cool

the mower in a safe place.

down first.

When you interrupt work to

Never expose the Accu to

move to another working area,

direct sunlight while charging.

always switch off your Cordless

Never charge the Accu any-

Motor Mower and remove the

where near acids and easily

key from the socket.

inflammable materials.

Danger of fire !

Check the environment

Only use the Accu for the

appliances intended.

Never use the unit when it is

raining or in damp or wet areas.

Do not throw the used Accu

into fire under any circum-

Do not operate your Cordless

stances. Danger of fire !

Motor Mower near swimming

pools or garden ponds.

Never bridge the contacts

in the Accu. Danger of short

Please observe the prescribed

circuits and fire.

local quiet times.

Keep the charger in a dry

place.

Possible cause

Remedy

Motor fixing screws or

Tighten screws.

mower casing loose.

Foreign body blocking the

Turn off the mower.

cutting cylinder.

Remove the key from the socket.

Remove the foreign body.

Tab on Accu loose.

Open the cover

the tab receptacle onto the tab.

Key not inserted.

Insert the key into the socket.

Circuit breaker has been

Wait approx. 5 -10 minutes then

triggered.

turn on the motor again.

Blocked by foreign body.

Switch off the motor.

Blocking protection activated.

Remove the key from the socket.

Remove the foreign body.

and push