Lexmark C925 Riferimento rapido - Pagina 9

Sfoglia online o scarica il pdf Riferimento rapido per Stampante Lexmark C925. Lexmark C925 12. Setup sheet
Anche per Lexmark C925: Manuale dell'amministratore (20 pagine), Manuale dell'amministratore (12 pagine), Manuale di connessione (7 pagine), Nota di rilascio (4 pagine), Manuale dell'amministratore (13 pagine), Manuale di manutenzione (15 pagine), Manuale (14 pagine), Manuale dell'amministratore (12 pagine), Riferimento rapido (10 pagine), Paper Manual (3 pagine), Mappa del menu (2 pagine), Manuale di trasloco (2 pagine), Manuale delle forniture (2 pagine), Manuale informativo (1 pagine), Manuale dei difetti di stampa (1 pagine), Installazione (2 pagine), Servizio di formazione (18 pagine)

Stampa la pagina
Lexmark C925 Riferimento rapido
2
Determine where the jam is located, and then remove it:
a
If the paper is visible under the fuser, then grasp it on each side
and pull it out.
b
If the paper is not visible, then you will need to remove the fuser
unit.
Warning—Potential Damage: Do not touch the center of
the fuser unit. Doing so will damage the fuser.
1
Lift the handles on each side of the fuser, and then pull to
remove the fuser unit.
2
Remove the jammed paper.
Notes:
•
Make sure all paper fragments are removed.
•
Pull the jammed paper downwards.
•
If the paper is in the fuser, then the fuser nip release
lever should be lowered and should be switched to
envelope mode.
•
After removing the jammed paper, return the lever to
the proper position.
3
Align the fuser unit using the handles on each side, and then
place it back into the printer.
3
Close the side door.
4
Touch Continue, jam cleared.
9

203 paper jam

1
Grasp any jammed paper visible in the standard exit bin, and then
gently pull it out.
Notes:
•
Make sure all paper fragments are removed.
•
If the page is in the fuser, then the fuser nip release lever
should be lowered and should be switched to envelope
mode.
•
After removing the jammed page, return the lever to the
proper position.
2
Touch Continue, jam cleared.

230 paper jam

1
Open the side door.
2
Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.