Lexmark C925 Hızlı Referans - Sayfa 9

Yazıcı Lexmark C925 için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark C925 12 sayfaları. Setup sheet
Ayrıca Lexmark C925 için: Yönetici El Kitabı (20 sayfalar), Yönetici El Kitabı (12 sayfalar), Bağlantı Kılavuzu (7 sayfalar), Yayın Notu (4 sayfalar), Yönetici El Kitabı (13 sayfalar), Bakım Kılavuzu (15 sayfalar), Manuel (14 sayfalar), Yönetici El Kitabı (12 sayfalar), Hızlı Referans (10 sayfalar), Kağıt El Kitabı (3 sayfalar), Menü Haritası (2 sayfalar), Taşıma Kılavuzu (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Kurulum (2 sayfalar), Hizmet Eğitimi (18 sayfalar)

Sayfayı Yazdır
Lexmark C925 Hızlı Referans
2
Determine where the jam is located, and then remove it:
a
If the paper is visible under the fuser, then grasp it on each side
and pull it out.
b
If the paper is not visible, then you will need to remove the fuser
unit.
Warning—Potential Damage: Do not touch the center of
the fuser unit. Doing so will damage the fuser.
1
Lift the handles on each side of the fuser, and then pull to
remove the fuser unit.
2
Remove the jammed paper.
Notes:
•
Make sure all paper fragments are removed.
•
Pull the jammed paper downwards.
•
If the paper is in the fuser, then the fuser nip release
lever should be lowered and should be switched to
envelope mode.
•
After removing the jammed paper, return the lever to
the proper position.
3
Align the fuser unit using the handles on each side, and then
place it back into the printer.
3
Close the side door.
4
Touch Continue, jam cleared.
9

203 paper jam

1
Grasp any jammed paper visible in the standard exit bin, and then
gently pull it out.
Notes:
•
Make sure all paper fragments are removed.
•
If the page is in the fuser, then the fuser nip release lever
should be lowered and should be switched to envelope
mode.
•
After removing the jammed page, return the lever to the
proper position.
2
Touch Continue, jam cleared.

230 paper jam

1
Open the side door.
2
Hold onto the handles of the duplexing unit, open the cover, and
then remove any jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.