Gardena 4000/5 Manuale di istruzioni per l'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pompa dell'acqua Gardena 4000/5. Gardena 4000/5 17. Garden pump
Anche per Gardena 4000/5: Manuale di istruzioni per l'uso (10 pagine), Manuale di istruzioni per l'uso (12 pagine), Manuale dell'operatore (14 pagine), Manuale dell'operatore (11 pagine), Manuale dell'operatore (10 pagine), Manuale di istruzioni per l'uso (18 pagine), Manuale dell'operatore (10 pagine), Manuale di istruzioni per l'uso (19 pagine), Manuale di istruzioni per l'uso (13 pagine), Manuale di istruzioni per l'uso (17 pagine)

Stampa la pagina

Gardena 4000/5 Manuale di istruzioni per l'uso

6. Preparation for Storage

Winter storage / out of use:

Disposal:

(in accordance with

directive 20002/96/EC)

7. Maintenance

Clean built-in filter:

Clean non-return valve:

Empty the Electronic Pressure Pump before the first frost.

1. Unplug the pump from the mains.

2. Turn rotary switch

3. Unscrew drain bolt

The pump will be drained.

4. Store the pump in a frost-free, dry place.

Unit may not be disposed of with normal household waste but

must be disposed of in accordance with environmental

regulations.

Danger ! Electric shock !

There is a risk of injury from electric power.

➔ Pull out mains plug before undertaking any maintenance.

1. Turn rotary switch

2. If necessary, close all the shut-off devices on the intake side.

3. Unscrew and remove cover

of the filter chamber.

4. Draw out filter unit vertically

upwards.

5. Hold beaker

anti-clockwise 1 and draw

out 2 (bayonet fitting).

6. Clean beaker under running

water and clean the filter e.g.

with a soft brush.

7. Refit filter again in reverse order.

1. Pull out mains plug.

2. Turn rotary switch

3. If necessary, close all the shut-off

devices on the intake side.

4. Open all the valves so that the delivery

side is not under pressure.

5. Unscrew the drain screw bolt

drain out water.

6. Unscrew screw

holder

upwards 1 and backwards

2 into the bearing groove.

7. Unscrew cover

valve with a suitable tool.

to .START.

to RUN.

firmly, turn filter

to START.

and

and push the

of non-return