Lexmark E460 Series Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stampante Lexmark E460 Series. Lexmark E460 Series 4. Lexmark printer user manual
Anche per Lexmark E460 Series: Specifiche tecniche (4 pagine), Riferimento rapido (2 pagine), Nota tecnica (3 pagine), Manuale di stampa (10 pagine), Manuale di connessione (5 pagine), Manuale dei media (4 pagine), Impostazione della rete (4 pagine), Manuale delle forniture (2 pagine), Scheda di configurazione (2 pagine), Manuale informativo (1 pagine), Manuale di manutenzione (10 pagine), Opuscolo e specifiche (portoghese) (6 pagine)

How to Reset the Photoconductor Page

Count on a Lexmark E460 Printer

Lexmark E460

Solution

Overview

You must reset the photoconductor page count at any time you replace the photoconductor unit.

Otherwise, the printer will not register the photoconductor replacement, and it will think that the

old photoconductor unit is still installed. The printer will therefore continue to display an 84 - PC

Kit life or a Photoconductor (PC) Life Warning message. In addition, once the old,

unreset photoconductor page count reaches a certain point, the printer will stop printing and

display an 84 - Replace PC Kit or a Photoconductor Exhausted message.

NOTE:

For more information on these error messages and their meaning, see the section

labeled Error messages located near the end of this article.

To reset the photoconductor page count

IMPORTANT!

new photoconductor kit is installed. Resetting the page count without replacing the

photoconductor kit will cause the photoconductor to operate beyond its intended life

and create print quality issues or possibly damage the printer.

Step

After installing the new photoconductor unit, open the front cover. Leave the printer powered

on.

The photoconductor page count should be reset only when a completely

Action