AlienTek T100 Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Pistola di saldatura AlienTek T100. AlienTek T100 16. Smart soldering station

AlienTek T100 Manuale d'uso
ALIENTEK

7. Firmware upgrade

1.
Disconnect the power supply, disconnect the handle and the host, use cable to connect the
USB to TTL serial port module and the host according to the following Figure 7.1
connection.
Press and hold the encoder then power on, wait until the screen displays "Firmware Upgrade"
2.
and release the encoder, as shown in Figure 7.2 below.
3.
Open the firmware upgrade software, select the serial port number, open the serial port, select
the serial port upgrade, open the upgrade file (.atk file), and finally click start upgrade and
wait for the upgrade to complete. The operation is shown in Figure 7.3 below.
T100 Smart Soldering station
Fig 7.1 upgrade connection
Fig 7.2 enter upgrade
11
User Manual