Alinco DJ-196 Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Radio bidirezionale Alinco DJ-196. Alinco DJ-196 18. Vhf/uhf fm transceiver
Anche per Alinco DJ-196: Manuale di istruzioni (20 pagine)
Stampa la pagina
[Ｍ] or [Ｃ] is not displayed on the LCD in the VFO mode.
[UP/DOWN with channel step]
1. Rotating the dial clockwise increases frequency 1 channel step/1 click, and rotating
counterclockwise decreases the frequency 1 channel step/1 click.
[1MHz UP/DOWN]
1. Press the [F] key then rotate the dial while [F] icon is ON, the frequency increases
or decreases by 1MHz depending on the direction of the rotation.
[Keypad Direct Entry]
The frequency is set with the numerical keys of 0~9.
【Setting】
1. Enter the 100MHz digit.
2. Enter the 10MHz digit.
3. Enter the 1MHz digit.
4. Enter the 100kHz digit.
5. Enter the 10kHz digit.
Depending on the channel step, entry may be required to the 1kHz digit or 10kHz
digit.A confirmation tone sounds when the final digit is entered, then the setting has
been completed. The entry method of each channel step is described as follows.
Channel step
Entry completion digit
........................................................................................................
5.0kHz
1kHz
10.0kHz
12.5kHz
0.....00.0
1.....12.5
5....50.0
6.....62.5
15.0kHz
25kHz
0...00.0
2.....25.0
30kHz
........................................................................................................
5-6 Channel Step
1. Press and hold the [F] key, then rotate the dial while [F] icon is ON. The frequency
increases or decreases by 1MHz depending on the direction of rotation.
In VFO mode press and hold [F] key, then press 1/STEP key while [F] icon is ON,
and the current channel step will appear.
2. Rotate the dial, the channel step toggles as follows.
..... Downward..................................upward...........................................
........STP- 5.....STP-10.....STP-12.5.....STP-15......STP-20......STP-25......STP-30.....
...........................................................................................................
3. Press any key (except for MONI and FUNC keys) to complete the setting. The LCD returns
to the ordinal mode.
Or press and hold the FUNC key, then press the 1/STEP key to complete the setting.
4. The Lamp and MONI keys are activate even while channel step appears on the LCD.
5. In the memory mode the channel step can not be selected.
Note: When the step values are changed from 5kHz, 10kHz, 15kHz, 20kHz or
Enter up to 1kHz digit.
10kHz
Enter up to 10kHz digit.
10kHz
Enter 10kHz digit and 1kHz digit.
2.....25.0
7.....75.0
1kHz
Enter up to 1kHz digit.
10kHz
Enter 10kHz digit, and 1kHz digit is determined.
5.....50.0
7......75.0
10kHz
Enter 10kHz digit, and 1kHz digit is determined.
Entry method of for the final digit
3.....37.5
4......invalid
8......87.5
9......invalid
Others are invalid.