Brother 888X64 Series Manuale operativo - Pagina 17

Sfoglia online o scarica il pdf Manuale operativo per Macchina da cucire Brother 888X64 Series. Brother 888X64 Series 48.
Anche per Brother 888X64 Series: Manuale operativo (2 pagine), Manuale operativo (47 pagine), Manuale operativo (2 pagine), Manuale operativo (48 pagine), Manuale operativo (3 pagine)

Stampa la pagina

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Lower threading (for

models equipped with a

quick-set bobbin)

Install the bobbin wound with thread.

This feature is only available on certain models.

Follow steps

threading" on page 15.

While lightly holding down the bobbin

with your right hand as shown, guide the

thread through the slit (1 and 2). Then,

pull the thread toward you to cut it with

the cutter (3).

• At this time, check that the bobbin easily

rotates counterclockwise.

1 Slit

2 Cutter (Cut the thread with the cutter.)

Note

● If the thread is not correctly inserted through

the tension-adjusting spring of the bobbin

case, it may cause incorrect thread tension.

1 Tension-adjusting spring

from "Lower

Replace the bobbin cover. Put the

projection into the race retainer groove

and push closed.

1 Groove

2 Projection

• Start sewing after threading the lower and

upper thread. When sewing gathers or darts,

you can draw up the lower thread by hand so

that some thread will be left over. Refer to the

steps in "Drawing up the lower thread"

(page 21).