Brother 929D Manuale di servizio - Pagina 8

Sfoglia online o scarica il pdf Manuale di servizio per Macchina da cucire Brother 929D. Brother 929D 20.

How to use the gauge

1. Raise the presser bar and remove the presser foot and presser foot holder.

2. Lower the needle bar to its lowest position.

3. Position the spacer and gauge and tighten the screw.

4. Remove the spacer.

5. Raise the needle bar until the needle clamp contacts the gauge. Continue making the adjustment

described on the previous page. (The spacer is 2.4 mm thick.)

- 6-