Brother 929D Servicehandleiding - Pagina 8

Blader online of download pdf Servicehandleiding voor {categorie_naam} Brother 929D. Brother 929D 20 pagina's.

How to use the gauge

1. Raise the presser bar and remove the presser foot and presser foot holder.

2. Lower the needle bar to its lowest position.

3. Position the spacer and gauge and tighten the screw.

4. Remove the spacer.

5. Raise the needle bar until the needle clamp contacts the gauge. Continue making the adjustment

described on the previous page. (The spacer is 2.4 mm thick.)

- 6-