AlkaWay Ultrastream Undersink Kit Manuale di installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione per Sistemi di filtrazione dell'acqua AlkaWay Ultrastream Undersink Kit. AlkaWay Ultrastream Undersink Kit 12.

Stampa la pagina

4. Install tubes to faucet

1.Attaching the ¼" plastic tubes.

a.The RED tube connects to the

SHORTEST Metal Inlet Tube

(high pressure line MUST be red hose).

b.The WHITE tube connects to the MEDIUM

length Metal Inlet Tube.

c.The BLUE tube connects to the

LONGEST Metal Inlet Tube.

2.Attached the different coloured tubes. Start

with the RED tube, which is attached to the

shortest Metal Inlet Tube connector. Slide

the tube nut onto the ¼" tube. Then push

the end of the tube onto and over the flared

section of the connector and re-screw on

the nut.

Soaking the end of the tube in hot water will

make it easier to push the tube on.

3.Repeat for the other coloured tubes (as

stated in step 2 above).

5.Insert/feed the tubes carefully into

the drilled hole. If the hole is in a

stainless-steel sink, take care not to

cut or scratch the ¼" plastic tubes as

they are fed into the hole.

6.Feed the black washer and faucet

nut under the sink over the tubes and

back onto the threaded tube. And

then tighten.

Note: You can cut the tubes to

be shorter if you like, but we

recommend leaving them long

enough to pull the UltraStream

unit out of the cupboard to

change the filter.