AlkaWay Ultrastream Undersink Kit Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з монтажу для Системи фільтрації води AlkaWay Ultrastream Undersink Kit. AlkaWay Ultrastream Undersink Kit 12 сторінок.
Друкувати сторінку4. Install tubes to faucet
1.Attaching the ¼" plastic tubes.
a.The RED tube connects to the
SHORTEST Metal Inlet Tube
(high pressure line MUST be red hose).
b.The WHITE tube connects to the MEDIUM
length Metal Inlet Tube.
c.The BLUE tube connects to the
LONGEST Metal Inlet Tube.
2.Attached the different coloured tubes. Start
with the RED tube, which is attached to the
shortest Metal Inlet Tube connector. Slide
the tube nut onto the ¼" tube. Then push
the end of the tube onto and over the flared
section of the connector and re-screw on
the nut.
Soaking the end of the tube in hot water will
make it easier to push the tube on.
3.Repeat for the other coloured tubes (as
stated in step 2 above).
5.Insert/feed the tubes carefully into
the drilled hole. If the hole is in a
stainless-steel sink, take care not to
cut or scratch the ¼" plastic tubes as
they are fed into the hole.
6.Feed the black washer and faucet
nut under the sink over the tubes and
back onto the threaded tube. And
then tighten.
Note: You can cut the tubes to
be shorter if you like, but we
recommend leaving them long
enough to pull the UltraStream
unit out of the cupboard to
change the filter.
7