Garmin GPS 152H Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Sistema GPS marino Garmin GPS 152H. Garmin GPS 152H 32. Declaration of conformity
Anche per Garmin GPS 152H: Manuale di avvio rapido (49 pagine), Manuale di istruzioni per l'installazione (36 pagine), Importanti informazioni sulla sicurezza (48 pagine), Dichiarazione di conformità (6 pagine)

Stampa la pagina

3. Select a data field to change.

4. Select the new field you want shown.

•

Full Screen Map On (or Off)—hides or shows the data fields

from all main pages (except the Active Route page).

•

Loran TD On (or Off)—allows you to convert GPS

coordinates to Loran (Long Range Navigation) TDs. This

system is no longer a primary source of maritime navigation

and should not normally be used. Refer to the U.S. Coast

Guard site at

www.navcen.uscg.gov/loran/default.htm

additional information.

•

Configure Map—takes you to the Map tab (see

the Settings menu.

•

Measure Distance—allows you to measure the distance and

bearing between two points on the Map Page.

To measure the distance and bearing between two points:

1. From the Map page, press

2. Use the

Rocker

to move the pointer (indicated by "ENT REF") to

the point you want to measure from, and press Enter.

GPS 152H Owner's Manual

page

and select

Measure

Distance.

3. Move the pointer to the point to which you want to measure. The

bearing, the distance, and the grid coordinates are displayed

along the top of the screen.

Start Simulator—turns the GPS receiver off for use indoors or for

practice using the chartplotter

Hide Tracks—shows or hides tracks

Create on Map—creates a route as described on

is available only when you are not currently navigating a route.

for

Invert—reverses a route

13) of

Plan Route—allows you to enter the boat speed, the fuel flow and

the departure time and date when planning a route.

Re-evaluate—recalculates and reactivates the current route data.

Using the Settings Menu

The Settings menu can be viewed from any of the Main pages by

pressing

twice.

Using the Waypoints Tab

From any Main page, press

See

page 3

for more information concerning creating and editing

waypoints and proximity alarms.

(page

23).

(page

8) on the Highway page.

page

(page

8).

twice and highlight Wpt.

Settings

7. This option