Brother MFC-J6710DW Manuale di configurazione rapida - Pagina 4

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante All in One Brother MFC-J6710DW. Brother MFC-J6710DW 39. Quick setup guide - spanish
Anche per Brother MFC-J6710DW: Manuale di configurazione rapida (41 pagine), Manuale di istruzioni (17 pagine), (Inglese) Guida alla configurazione rapida (41 pagine)

IMPORTANT

The telephone line cord MUST be connected

to the socket on the machine marked LINE.

Note

If you are sharing one telephone line with an

external telephone, connect it as shown below.

1 Extension telephone

2 External telephone

Note

If you are sharing one telephone line with an

external telephone answering machine, connect it

as shown below.

Set the receive mode to External TAD if you

have an external answering machine. See

Choose a Receive Mode on page 9. For

additional details, see Connecting an external

TAD (telephone answering device) in chapter 6 of

the Basic User's Guide.

You must set your country so that the machine works

correctly on local telecommunication lines in each

country.

Set Country

Australia

New Zealand

Australia

Yes

Set your country

(Australia and New

Zealand only)

Check that the power is turned on by

connecting in the power cord.

Press a or b to choose your country

(Australia or New Zealand), and press

OK.

If the LCD shows the correct country, press a or b

to select Yes, and press OK. Then go to step d.

Or press a or b to select No, and press OK. Then

go back to step b and choose the country again.

After the LCD shows Accepted for a few

seconds, the machine will restart automatically.

After the restart, the LCD shows Please Wait.

Select & Press