Brother MFC-J6710DW Manuale di configurazione rapida - Pagina 2

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Stampante All in One Brother MFC-J6710DW. Brother MFC-J6710DW 39. Quick setup guide - spanish
Anche per Brother MFC-J6710DW: Manuale di configurazione rapida (41 pagine), Manuale di istruzioni (17 pagine), (Inglese) Guida alla configurazione rapida (41 pagine)

Note

• Save all packing materials and the box in case

for any reason you must ship your machine.

• For a network connection you will need to

purchase a network interface cable. Please

use the supplied USB cable for a USB

connection.

USB cable

It is recommended to use a USB 2.0 cable (Type

A/B) that is no more than 2 metres long.

Network cable

Use a straight-through Category5 (or greater)

twisted-pair cable for 10BASE-T or 100BASE-TX

Fast Ethernet Network.

Load plain A4 paper

Pull the paper tray (For MFC-J6710DW, paper

tray #1, the upper tray) a completely out of the

machine.

Open the output paper tray cover a.

DO NOT push the paper in too far.

With both hands, gently press and slide the

paper length guide a and then the paper side

guides b to fit the paper size.

Make sure that the triangular marks c on the

paper length guide a and paper side guides b

line up with the mark for the paper size you are

using.

EXE

LTR

LGR

Photo 2L

LGL

4×6in

10×15cm

JIS

Fan the stack of paper well to avoid paper jams

and misfeeds.

Gently put the paper into the paper tray (For

MFC-J6710DW, tray #1) print side down and

top edge first.

Note

JIS

EXE

LTR