Brother MFC-J6710DW 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Brother MFC-J6710DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6710DW 39 페이지. Quick setup guide - spanish
Brother MFC-J6710DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (41 페이지), 사용 설명서 (17 페이지), (영어) 빠른 구성 가이드 (41 페이지)

페이지 인쇄

Note

• Save all packing materials and the box in case

for any reason you must ship your machine.

• For a network connection you will need to

purchase a network interface cable. Please

use the supplied USB cable for a USB

connection.

USB cable

It is recommended to use a USB 2.0 cable (Type

A/B) that is no more than 2 metres long.

Network cable

Use a straight-through Category5 (or greater)

twisted-pair cable for 10BASE-T or 100BASE-TX

Fast Ethernet Network.

Load plain A4 paper

Pull the paper tray (For MFC-J6710DW, paper

tray #1, the upper tray) a completely out of the

machine.

Open the output paper tray cover a.

DO NOT push the paper in too far.

With both hands, gently press and slide the

paper length guide a and then the paper side

guides b to fit the paper size.

Make sure that the triangular marks c on the

paper length guide a and paper side guides b

line up with the mark for the paper size you are

using.

EXE

LTR

LGR

Photo 2L

LGL

4×6in

10×15cm

JIS

Fan the stack of paper well to avoid paper jams

and misfeeds.

Gently put the paper into the paper tray (For

MFC-J6710DW, tray #1) print side down and

top edge first.

Note

JIS

EXE

LTR