Brother MFC-J6710DW 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} Brother MFC-J6710DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J6710DW 39 페이지. Quick setup guide - spanish
Brother MFC-J6710DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (41 페이지), 사용 설명서 (17 페이지), (영어) 빠른 구성 가이드 (41 페이지)

페이지 인쇄

Gently adjust the paper side guides to the

paper with both hands. Make sure that the

paper side guides touch the edges of the

paper.

Close the output paper tray cover. Check that

the paper is flat in the tray and below the

maximum paper mark a.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

Note

(For MFC-J6710DW)

For information about tray #2 (the lower tray), see

Loading paper in paper tray #2 in chapter 2 of the

Basic User's Guide.

2 2

1 1

Connect the power cord

and telephone line

IMPORTANT

DO NOT connect the USB cable yet (if you are

using a USB cable).

Connect the power cord.

WARNING

The machine must be fitted with an earthed

plug.

Connect the telephone line cord. Connect one

end of the telephone line cord to the socket on

the machine marked LINE and the other end to

a telephone wall socket.

WARNING

Since the machine is grounded through the

power outlet, you can protect yourself from

potentially hazardous electrical conditions on

the telephone network by keeping the power

cord connected to your machine when you

connect it to a telephone line. Similarly, you

can protect yourself when you want to move

your machine by disconnecting the telephone

line first and then the power cord.