Brother MFC-J6710DW Manuel d'installation rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-J6710DW. Brother MFC-J6710DW 39 pages. Quick setup guide - spanish
Également pour Brother MFC-J6710DW : Manuel d'installation rapide (41 pages), Manuel d'instructions (17 pages), (anglais) Quick Configuration Guide (41 pages)
Imprimer la page
Note
• Save all packing materials and the box in case
for any reason you must ship your machine.
• For a network connection you will need to
purchase a network interface cable. Please
use the supplied USB cable for a USB
connection.
USB cable
It is recommended to use a USB 2.0 cable (Type
A/B) that is no more than 2 metres long.
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
2
Load plain A4 paper
a
Pull the paper tray (For MFC-J6710DW, paper
tray #1, the upper tray) a completely out of the
machine.
b
Open the output paper tray cover a.
1
2
c
2
1
d
e
DO NOT push the paper in too far.
With both hands, gently press and slide the
paper length guide a and then the paper side
guides b to fit the paper size.
Make sure that the triangular marks c on the
paper length guide a and paper side guides b
line up with the mark for the paper size you are
using.
1
3
EXE
LTR
LGR
L
Photo 2L
LGL
4×6in
10×15cm
B5
JIS
A4
B4
JIS
Fan the stack of paper well to avoid paper jams
and misfeeds.
Gently put the paper into the paper tray (For
MFC-J6710DW, tray #1) print side down and
top edge first.
Note
B5
JIS
EXE
LTR
A4
3