Brother Work Smart MFC-J470dw Manuale d'uso avanzato - Pagina 24
Sfoglia online o scarica il pdf Manuale d'uso avanzato per Stampante All in One Brother Work Smart MFC-J470dw. Brother Work Smart MFC-J470dw 48. Printers
Anche per Brother Work Smart MFC-J470dw: Manuale di stampa ad aria compressa (12 pagine), Specificazioni (2 pagine), Manuale di avvio rapido (35 pagine), Manuale di avvio rapido (35 pagine), Manuale di configurazione rapida (37 pagine)
Stampa la pagina
Chapter 5
Setting up Groups for
Broadcasting
A Group, which is stored in a Speed Dial
location, allows you to send the same fax
message to many fax numbers by pressing
(Address Book), Search, OK, the
two-digit location and Mono Start.
(See Broadcasting (Monochrome only)
on page 9.)
First, you'll need to store each fax number in
a Speed Dial location. (See Basic User's
Guide: Storing Speed Dial numbers.) Then
you can include them as numbers in the
Group. Each Group uses a Speed Dial
location. You can have up to six Groups, or
you can assign up to 39 numbers to a large
Group.
a
Press
(Address Book).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d
Press a or b to choose the two-digit
Speed Dial location you want to add to
the Group.
Press OK.
e
Press a or b to choose Add Number.
Press OK.
f
To add numbers to the Group, press
a or b to choose
Alphabetical Order or
Numerical Order and press OK.
Press a or b to select a number and
press OK.
20
g
Do one of the following:
To add another number to the Group,
5
repeat steps e to f.
If you are finished adding numbers to
the Group, press a or b to choose
Complete.
Press OK.
h
Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
NOTE
You can print a list of all the Speed Dial
numbers. (See Reports on page 23.)
Changing a Group name
a
Press
(Address Book).
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose the Group name
you want to change.
Press OK.
d
Press a or b to choose
Change Group Name.
Press OK.
NOTE
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
5