Brother P-touch E110 Manuale d'uso - Pagina 17

Sfoglia online o scarica il pdf Manuale d'uso per Etichettatrice Brother P-touch E110. Brother P-touch E110 18.
Anche per Brother P-touch E110: Manuale d'uso (18 pagine)

Stampa la pagina

 What to do when

Problem

The display

• Check that the batteries are

remains blank

correctly installed. See the

after you have

Installing Power Supply and

turned on the

Tape Cassette section.

P-touch

• The batteries may be weak.

labelling

Replace them.

machine.

• Check that the AD-24ES

Adapter is correctly connected.

When the

label is

See the Setting Margins section

printed, there

in this guide and select [Half],

is too much

[Narrow] or [Chain Print]

margin

to have smaller margins for your

(space) on

labels.

both sides

of the text.

The P-touch

labelling

• Check that the cassette is

machine

inserted correctly.

does not print,

• If the cassette is empty,

or the printed

replace it.

characters

• Check that the Tape Cassette

are not

Cover is closed correctly.

formed

properly.

The setting

• The batteries may be weak.

has cleared

Replace them.

on its own.

• When power is disconnected for

more than three minutes, all text

and formats in the display

settings are cleared.

A blank

There may be some dust on the

horizontal line

Print Head. Remove the cassette

appears

and use a dry cotton swab to

through the

gently wipe the Print Head with

printed tape.

an up-and-down motion. See the

Installing Power Supply and

Tape Cassette section for the

Print Head location.

Solution

Problem

The P-touch

labelling

machine has

"locked up"

(nothing

happens

For more information, see the

when a key

Resetting the P-touch

is pressed,

Labelling Machine section.

even though

the P-touch

labelling

machine

is on.)

The power

• The batteries may be weak.

turns off when

Replace them.

you try to

• Check that the batteries are

print.

correctly inserted.

• The wrong AC Adapter is used.

We recommend using the

AD-24ES Adapter.

The tape does

• Check that the end of the tape

not feed

feeds under the tape guides.

correctly or

For more information, see the

the tape gets

Installing Power Supply and

stuck inside

Tape Cassette section.

the P-touch

• The Cutter Lever was pressed

labelling

while printing. Do not touch

machine.

the Cutter Lever during printing.

To change

For more information, see the

language

Initial Settings section.

setting.

Solution