Brother P-touch E110 Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother P-touch E110. Brother P-touch E110 18 сторінок.
Також для Brother P-touch E110: Посібник користувача (18 сторінок)

Друкувати сторінку
Brother P-touch E110 Посібник користувача
 What to do when
Problem
The display
• Check that the batteries are
remains blank
correctly installed. See the
after you have
Installing Power Supply and
turned on the
Tape Cassette section.
P-touch
• The batteries may be weak.
labelling
Replace them.
machine.
• Check that the AD-24ES
Adapter is correctly connected.
When the
label is
See the Setting Margins section
printed, there
in this guide and select [Half],
is too much
[Narrow] or [Chain Print]
margin
to have smaller margins for your
(space) on
labels.
both sides
of the text.
The P-touch
labelling
• Check that the cassette is
machine
inserted correctly.
does not print,
• If the cassette is empty,
or the printed
replace it.
characters
• Check that the Tape Cassette
are not
Cover is closed correctly.
formed
properly.
The setting
• The batteries may be weak.
has cleared
Replace them.
on its own.
• When power is disconnected for
more than three minutes, all text
and formats in the display
settings are cleared.
A blank
There may be some dust on the
horizontal line
Print Head. Remove the cassette
appears
and use a dry cotton swab to
through the
gently wipe the Print Head with
printed tape.
an up-and-down motion. See the
Installing Power Supply and
Tape Cassette section for the
Print Head location.
Solution
Problem
The P-touch
labelling
machine has
"locked up"
(nothing
happens
For more information, see the
when a key
Resetting the P-touch
is pressed,
Labelling Machine section.
even though
the P-touch
labelling
machine
is on.)
The power
• The batteries may be weak.
turns off when
Replace them.
you try to
• Check that the batteries are
print.
correctly inserted.
• The wrong AC Adapter is used.
We recommend using the
AD-24ES Adapter.
The tape does
• Check that the end of the tape
not feed
feeds under the tape guides.
correctly or
For more information, see the
the tape gets
Installing Power Supply and
stuck inside
Tape Cassette section.
the P-touch
• The Cutter Lever was pressed
labelling
while printing. Do not touch
machine.
the Cutter Lever during printing.
To change
For more information, see the
language
Initial Settings section.
setting.
Solution