Brother QL-1110NWB Manuale di configurazione rapida - Pagina 3
Sfoglia online o scarica il pdf Manuale di configurazione rapida per Etichettatrice Brother QL-1110NWB. Brother QL-1110NWB 9.
Anche per Brother QL-1110NWB: Manuale di configurazione rapida (9 pagine), Manuale (2 pagine)
Stampa la pagina
3. Connect the Power Cord
Connect the AC Power Cord to the Label Printer. Then, plug the
AC Power Cord into a grounded AC power outlet.
4. Load the DK Roll
1.
Make sure that the Label Printer is turned Off.
2.
Pull the release levers on both sides of the Label Printer to
unlock the DK Roll Compartment Cover.
• Hold the Label Printer by the front, and firmly lift the DK
Roll Compartment Cover to open it.
IMPORTANT
IMPORTANT
Before using the Label Printer, remove the protective sheet
(1) from the Label Output Slot.
3.
Place the DK Roll into the Roll Spool Guide (1).
• Make sure that the Roll Spool Arm (2) is inserted firmly in
the Roll Spool Guide.
• Make sure the Stabilizer (3) slides into the notch in the
Label Printer.
1
3
2
1