Fujitsu PRIMERGY Econel 200 S2 Manuale di servizio supplementare - Pagina 30

Sfoglia online o scarica il pdf Manuale di servizio supplementare per Server Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39.

Replacing the Chassis ID board

Ê Press sideward on the hooks of the new intrusion switch holder and press

the holder into the chassis.

Ê Install the processor fan 2 (for a detailed description see the Options Guide).

Ê Close the server (for a detailed description see the Options Guide) and

connect the power plug.

4.7

Replacing the Chassis ID board

Part number: T26139-Y3850-V229

Ê Remove the side cover as described in section "Preparation" on page 17.

Figure 14: Removing the Chassis ID board

Ê Remove the cable from the Chassis ID board (1).

Ê Loosen the screw (2) and remove the Chassis ID board.

Ê Insert the new Chassis ID board, fasten it with the screw and connect the

cable.

Service Supplement

Replacement routines

Econel 200 S2