Fujitsu PRIMERGY Econel 200 S2 Дополнительное руководство по обслуживанию - Страница 30
Просмотреть онлайн или скачать pdf Дополнительное руководство по обслуживанию для Сервер Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 страниц.
Печатать страницу
Replacing the Chassis ID board
Ê Press sideward on the hooks of the new intrusion switch holder and press
the holder into the chassis.
Ê Install the processor fan 2 (for a detailed description see the Options Guide).
Ê Close the server (for a detailed description see the Options Guide) and
connect the power plug.
4.7
Replacing the Chassis ID board
Part number: T26139-Y3850-V229
Ê Remove the side cover as described in section "Preparation" on page 17.
Figure 14: Removing the Chassis ID board
Ê Remove the cable from the Chassis ID board (1).
Ê Loosen the screw (2) and remove the Chassis ID board.
Ê Insert the new Chassis ID board, fasten it with the screw and connect the
cable.
30
Service Supplement
Replacement routines
Econel 200 S2