Fujitsu SPARC Enterprise M3000 Note sul prodotto - Pagina 14

Sfoglia online o scarica il pdf Note sul prodotto per Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42.
Anche per Fujitsu SPARC Enterprise M3000: Manuale introduttivo (8 pagine), Note sul prodotto (38 pagine), Manuale di sicurezza e conformità (34 pagine)

Notes on Power Consumption Monitoring

Function and Airflow Indicator

The amount of power consumption and exhaust air might not be indicated

■

correctly in the MIB information, in the showenvironment power and the

showenvironment air command output, and on the XSCF Web in the

following cases; and you should wait for one minute and check the value again.

■

The figures on the power consumption monitoring function and airflow indicator

■

respectively represent the dissipation power and volume of air exhausted from

the server. The figures of peripheral devices are not included.

We recommend the domain to use the XSCF Unit as NTP server. In this case, pay

■

attention to the following points:

■

For details on NTP server, contact a service engineer. For details on NTP settings,

refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF

User's Guide.

When the NTP server which XSCF refers to is referring to the server's own system

time (local clock), and when the address of "127.127.1.0" is set to that local clock,

time synchronization in XSCF might fail.

The address of the XSCF's own local clock is fixed to "127.127.1.0." On the other

hand, when the address of the local clock of the NTP server which XSCF refers to

is set to "127.127.1.0," the address of the clock source (refid) has the same value as

the address of the XSCF's own local clock. An NTP server like this is excluded

from the target of XSCF time synchronization.

You can execute the showntp -l command to refer to the address of the NTP

server's own clock source which is set in XSCF and the address of the XSCF's own

local clock.

SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010

During the server powering on or powering off, or for a while after the power-

on or power-off complete

During the active replacement of power supply unit, or for a while after the

active replacement complete

XSCF must be connected to an external NTP server

When you connect one or more NTP servers in addition to XSCF, connect the

same NTP server as XSCF is using