Fujitsu SPARC Enterprise M3000 Note sul prodotto - Pagina 13

Sfoglia online o scarica il pdf Note sul prodotto per Server Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42.
Anche per Fujitsu SPARC Enterprise M3000: Manuale introduttivo (8 pagine), Note sul prodotto (38 pagine), Manuale di sicurezza e conformità (34 pagine)

XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-

■

E HBA

XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel

■

PCI-E HBA

Updating to XCP 1093

To update your XCP to XCP 1093, refer to the SPARC Enterprise

M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for instructions.

After updating the XCP firmware to 1093, do not fail to reset the XSCF by using the

rebootxscf(8) command.

This section describes the known issues and limitations at the time of this release.

While Active Directory is enabled, when you attempt to login to XSCF via the

■

telnet, you might fail to login due to timeout of the query to secondary alternated

server or later.

If the specified timeout is too brief for the configuration, the login process or

■

retrieval of user privilege settings could fail. In such case, specify larger value for

the timeout and then try again.

If the specified timeout is too brief for the configuration, the login process or

retrieval of user privilege settings could fail. In such case, specify larger value for the

timeout and try again.

General Information About XCP 1093