Fujitsu SPARC Enterprise M3000 Product opmerkingen - Pagina 13

Blader online of download pdf Product opmerkingen voor {categorie_naam} Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42 pagina's.
Ook voor Fujitsu SPARC Enterprise M3000: Aan de slag handleiding (8 pagina's), Product opmerkingen (38 pagina's), Veiligheids- en nalevingshandleiding (34 pagina's)

XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-

■

E HBA

XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel

■

PCI-E HBA

Updating to XCP 1093

To update your XCP to XCP 1093, refer to the SPARC Enterprise

M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for instructions.

After updating the XCP firmware to 1093, do not fail to reset the XSCF by using the

rebootxscf(8) command.

This section describes the known issues and limitations at the time of this release.

While Active Directory is enabled, when you attempt to login to XSCF via the

■

telnet, you might fail to login due to timeout of the query to secondary alternated

server or later.

If the specified timeout is too brief for the configuration, the login process or

■

retrieval of user privilege settings could fail. In such case, specify larger value for

the timeout and then try again.

If the specified timeout is too brief for the configuration, the login process or

retrieval of user privilege settings could fail. In such case, specify larger value for the

timeout and try again.

General Information About XCP 1093