Fujitsu SPARC Enterprise M3000 Notas de produto - Página 13
Procurar online ou descarregar pdf Notas de produto para Servidor Fujitsu SPARC Enterprise M3000. Fujitsu SPARC Enterprise M3000 42 páginas.
Também para Fujitsu SPARC Enterprise M3000: Manual de iniciação (8 páginas), Notas de produto (38 páginas), Manual de Segurança e Conformidade (34 páginas)
Imprimir página
XSEFC402AF Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCI-
■
E HBA
XSEFC401AF Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel
■
PCI-E HBA
Updating to XCP 1093
To update your XCP to XCP 1093, refer to the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for instructions.
Resetting the XSCF Firmware
After updating the XCP firmware to 1093, do not fail to reset the XSCF by using the
rebootxscf(8) command.
Functionality Issues and Limitations
This section describes the known issues and limitations at the time of this release.
Notes on Active Directory
While Active Directory is enabled, when you attempt to login to XSCF via the
■
telnet, you might fail to login due to timeout of the query to secondary alternated
server or later.
If the specified timeout is too brief for the configuration, the login process or
■
retrieval of user privilege settings could fail. In such case, specify larger value for
the timeout and then try again.
Notes on LDAP/SSL
If the specified timeout is too brief for the configuration, the login process or
retrieval of user privilege settings could fail. In such case, specify larger value for the
timeout and try again.
General Information About XCP 1093
3