Fujitsu fi-5220C Manuale introduttivo - Pagina 24

Sfoglia online o scarica il pdf Manuale introduttivo per Scanner Fujitsu fi-5220C. Fujitsu fi-5220C 29. Flatbed scanner
Anche per Fujitsu fi-5220C: Come iniziare (28 pagine), Manuale delle procedure di installazione (7 pagine), Manuale delle procedure di installazione (9 pagine), Procedure di installazione (3 pagine), Specifiche tecniche (2 pagine), Manuale di istruzioni (13 pagine), Istruzioni per la pulizia (2 pagine), Istruzioni per la pulizia (2 pagine)

Symptom

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

The generated images are

elongated.

There is a shadow on the

leading edge of the gener-

ated image.

AP-2

Check this item

Do the documents satisfy the "Docu-

ment Quality" and the "Multi feed

Detection Conditions" in the chapter 6

of the fi-5530C Operator's Guide?

Is the Pick roller dirty?

Is the Pick roller worn out?

Is there any dirt or dust in the document

feed path?

Are the Feed rollers dirty?

Have you adjusted the scan scale?

Are the Feed rollers dirty?

Have you adjusted the offset (the scan-

ning starting position)?

Remedy

Use the documents that satisfy the "Document

Quality" and the "Multi feed Detection Condi-

tions" in the chapter 6 of the fi-5530C Operator's

Guide.

Clean the Pick roller. Refer to Operator's Guide in

"3.3. Cleaning the ADF".

Change the Pick roller. Refer to Operator's Guide

in "4.3. Replacing the Pick Roller".

Remove any dirt or dust from the document feed

path.

Clean the Feed rollers. Refer to Operator's Guide

in "3.3. Cleaning the ADF".

For Windows 2000, WindowsXP, select "Scan-

ners and Cameras" in the control panel, then click

the [Device Set] tab to adjust scale.

Clean the Feed rollers. Refer to Operator's Guide

in "3.3. Cleaning the ADF".

Adjust the [Sub-scan Setting] on [Scanners and

Cameras] in the control panel.