Fujitsu FI-5530C2 Manuale introduttivo - Pagina 11

Sfoglia online o scarica il pdf Manuale introduttivo per Scanner Fujitsu FI-5530C2. Fujitsu FI-5530C2 27. Image scanner
Anche per Fujitsu FI-5530C2: Come iniziare (28 pagine), Manuale delle procedure di installazione (6 pagine), Specifiche tecniche (2 pagine), Manuale introduttivo (11 pagine), Istruzioni per la pulizia (2 pagine), Istruzioni per la pulizia (2 pagine), Come iniziare (11 pagine)

Chapter2

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to section 7.2

"Installation Specifications" of "fi-5530C2 Oper-

ator's Guide" on the Setup CD-ROM.

2. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the figure below.

The Side guides of the ADF paper chute have to

face up.

ADF paper chute

Side guide

3. Connect the AC adapter.

Use only the AC adapter provided by the

ATTENTION

manufacturer.

1) Connect the AC cable to the AC adapter.

INSTALLATION OF THE SCANNER

Tab

fi-5530C2 Image Scanner Getting Started

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

AC cable into the outlet.

2.2 Connecting the Scanner to

Your Personal Computer

Connect either with the USB interface cable or the SCSI

interface cable.

This scanner is provided with two inter-

ATTENTION

faces: Ultra SCSI and USB 2.0 /1.1. Con-

nect only one of the USB or SCSI interface

cable.

■ Connecting with the USB

Interface Cable

1. Connect the USB interface cable to the USB

interface connector.