Fujitsu eternus af Manuale di configurazione - Pagina 17
Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu eternus af. Fujitsu eternus af 25. Fibre channel for citrix xenserver
Anche per Fujitsu eternus af: Manuale di configurazione (28 pagine), Manuale di configurazione (32 pagine), Manuale di configurazione (43 pagine)
Stampa la pagina
Chapter 8
Setting Up Oracle VM Server
8.1
Setting Up the Fibre Channel Cards
Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do
not need to be installed.
Use the procedure below to set the BIOS settings and the drive parameters for Fibre Channel cards.
1
Turn the server on, and watch for the following message to be displayed, in order to confirm that the
BIOS version specified in "Server Support Matrix" is installed.
QLogic Corporation
QLAxxxx PCI Fibre Channel ROM BIOS Version 1.50
Copyright (C) QLogic Corporation 1993-2006. All right reserved.
www.qlogic.com
Press <CTRL-Q> for Fast!UTIL
If the BIOS version matches that specified in "Server Support Matrix", press the [Ctrl]+[Q] keys while the
above message is displayed.
If the BIOS version differs from that specified in "Server Support Matrix", download and install the BIOS
version specified in "Server Support Matrix" from the QLogic Corp. web-site.
When two or more Fibre Channel cards are installed, the [Select Host Adapter] window appears. Se-
lect the Fibre Channel card to be set in the window.
2
Select [Configuration Settings] from the [Fast!UTIL Options] menu and press the [Enter] key.
The [Configuration Settings] menu appears.
3
Select the [Host Adapter Settings] item.
4
Check the values that are set in the [Host Adapter Settings] or [Adapter Settings] window.
The setting values vary depending on the type of Fibre Channel card used. Refer to the following table.
If the displayed values are different from those given in the following table, adjust them.
Refer to the Fibre Channel card manual and/or QLogic Corp. web-site for details.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86
Configuration Settings
Host Adapter Settings
Selectable Boot Settings
Restore Default Settings
Raw Nvram Data
Advanced Adapter Settings
Extended Firmware Settings
Copyright 2017 FUJITSU LIMITED
17
P3AM-6612-14ENZ0