Fujitsu eternus af 구성 매뉴얼 - 페이지 17

{카테고리_이름} Fujitsu eternus af에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu eternus af 25 페이지. Fibre channel for citrix xenserver
Fujitsu eternus af에 대해서도 마찬가지입니다: 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (43 페이지)

페이지 인쇄

Chapter 8

Setting Up Oracle VM Server

8.1

Setting Up the Fibre Channel Cards

Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do

not need to be installed.

Use the procedure below to set the BIOS settings and the drive parameters for Fibre Channel cards.

Turn the server on, and watch for the following message to be displayed, in order to confirm that the

BIOS version specified in "Server Support Matrix" is installed.

QLogic Corporation

QLAxxxx PCI Fibre Channel ROM BIOS Version 1.50

www.qlogic.com

Press <CTRL-Q> for Fast!UTIL

If the BIOS version matches that specified in "Server Support Matrix", press the [Ctrl]+[Q] keys while the

above message is displayed.

If the BIOS version differs from that specified in "Server Support Matrix", download and install the BIOS

version specified in "Server Support Matrix" from the QLogic Corp. web-site.

When two or more Fibre Channel cards are installed, the [Select Host Adapter] window appears. Se-

lect the Fibre Channel card to be set in the window.

Select [Configuration Settings] from the [Fast!UTIL Options] menu and press the [Enter] key.

The [Configuration Settings] menu appears.

Select the [Host Adapter Settings] item.

Check the values that are set in the [Host Adapter Settings] or [Adapter Settings] window.

The setting values vary depending on the type of Fibre Channel card used. Refer to the following table.

If the displayed values are different from those given in the following table, adjust them.

Refer to the Fibre Channel card manual and/or QLogic Corp. web-site for details.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86

Configuration Settings

Host Adapter Settings

Selectable Boot Settings

Restore Default Settings

Raw Nvram Data

Advanced Adapter Settings

Extended Firmware Settings

P3AM-6612-14ENZ0