Fujitsu SK-96320-80PMC Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Scheda madre Fujitsu SK-96320-80PMC. Fujitsu SK-96320-80PMC 34.
Anche per Fujitsu SK-96320-80PMC: Manuale d'uso (34 pagine), Manuale d'uso (34 pagine)
3 Jumpers and Switches
This chapter describes all jumpers and switches that can be modified on the evaluation
board. The default setting (MB96320 Series) is shown with a grey shaded area.
3.1 Operating Mode (S2)
The DIP-switch S2 is used to set the operating mode of the KC. Ensure that the mode pin
settings correspond to the operation-mode of the application. For more detailed information
please check the Hardware-Manual of the microcontroller.
DIP switch
S2/1 (MD0)
S2/2 (MD1)
S2/3 (MD2)
S2/4
Dip-Switch S2
(run mode)
FMEMCU-UG-960010-11
SK-96320-80PMC User Guide
Chapter 3 Jumpers and Switches
Setting
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
not connected
MD0 MD1 MD2 nc
1
2
3
- 12 -
Logical value
1 (high)
0 (low)
1 (high)
0 (low)
1 (high)
0 (low)
ON
OFF
4
© Fujitsu Microelectronics Europe GmbH