Fujitsu SK-96320-80PMC User Manual - Page 12

Browse online or download pdf User Manual for Motherboard Fujitsu SK-96320-80PMC. Fujitsu SK-96320-80PMC 34 pages.
Also for Fujitsu SK-96320-80PMC: User Manual (34 pages), User Manual (34 pages)

Print Page

3 Jumpers and Switches

This chapter describes all jumpers and switches that can be modified on the evaluation

board. The default setting (MB96320 Series) is shown with a grey shaded area.

3.1 Operating Mode (S2)

The DIP-switch S2 is used to set the operating mode of the KC. Ensure that the mode pin

settings correspond to the operation-mode of the application. For more detailed information

please check the Hardware-Manual of the microcontroller.

DIP switch

S2/1 (MD0)

S2/2 (MD1)

S2/3 (MD2)

S2/4

Dip-Switch S2

(run mode)

FMEMCU-UG-960010-11

SK-96320-80PMC User Guide

Chapter 3 Jumpers and Switches

Setting

ON (closed)

OFF (open)

ON (closed)

OFF (open)

ON (closed)

OFF (open)

not connected

MD0 MD1 MD2 nc

- 12 -

Logical value

1 (high)

0 (low)

1 (high)

0 (low)

1 (high)

0 (low)

OFF