A-Neu Video HD-88Kp Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Commutatore a matrice A-Neu Video HD-88Kp. A-Neu Video HD-88Kp 20. Hdmi matrix switch

NEUVIDEO

FRONT PANEL

POWER SWITCH:

he power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and

is receiving power. The switcher will remember that last state during a power cycle. When power is removed and resorted, the last

configuration will be evoked.

STATUS DISPLAY:

Front panel status display shows current matrix routing configuration. This same display also shows particular

configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)

channel to which input (source) it is assigned.

IR SENSOR:

The IR sensor receives IR commands from the supplied remote control or third party IR emitter.

INPUT STATUS DISPLAY:

SOURCE SELECT BUTTONS:

EDID MODE SELECT BUTTONS:

DESTINATION SELECT BUTTONS:

can be source to destination or one source to multiple destinations.

Example: Press Destination 1, 3, 5, then press Source 2. It will route Input 2 to Output 1, 3, 5 respectfully.

19 INCH EAR MOUNT PAIR:

bracket attached.

Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.

Separate inputs 1 thru 8 select buttons are provided each source selection.

Used to select EDID mode using Source button #1 or #2.

Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing

Converts desktop to 19 inch rack mount. Bracket (part # 2U-440L) INCLUDED. Image shows rack mount

FRONT PANEL