A-Neu Video HD-88Kp Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор A-Neu Video HD-88Kp. A-Neu Video HD-88Kp 20 страниц. Hdmi matrix switch

Печатать страницу
A
NEUVIDEO

FRONT PANEL

POWER SWITCH:
he power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and
q
is receiving power. The switcher will remember that last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
STATUS DISPLAY:
Front panel status display shows current matrix routing configuration. This same display also shows particular
w
configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)
channel to which input (source) it is assigned.
IR SENSOR:
The IR sensor receives IR commands from the supplied remote control or third party IR emitter.
e
INPUT STATUS DISPLAY:
r
SOURCE SELECT BUTTONS:
t
EDID MODE SELECT BUTTONS:
y
DESTINATION SELECT BUTTONS:
u
can be source to destination or one source to multiple destinations.
Example: Press Destination 1, 3, 5, then press Source 2. It will route Input 2 to Output 1, 3, 5 respectfully.
19 INCH EAR MOUNT PAIR:
i
bracket attached.
Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.
Separate inputs 1 thru 8 select buttons are provided each source selection.
Used to select EDID mode using Source button #1 or #2.
Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing
Converts desktop to 19 inch rack mount. Bracket (part # 2U-440L) INCLUDED. Image shows rack mount
4
FRONT PANEL