A-Neuvideo ANI-88UHD Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Interruttore A-Neuvideo ANI-88UHD. A-Neuvideo ANI-88UHD 16. 8x8 hdmi 4k uhd matrix w/ hdcp 2.2

Stampa la pagina

NEUVIDEO

FRONT PANEL

LCM:

Displays the setting information of each Input and Output setting.

POWER:

Press this button to power the device on/standby. The LED will illuminate green when the power is on, red when it is in

'Standby' mode.

LOCK:

Press this button to lock all the buttons on the panel. Press again to unlock. The LED will illuminate orange when locked.

IR:

IR Receiver window (accepts the remote control signal of this device only).

MENU:

Press this button to access the LCM menu system, from here EDID settings can be managed and the IP system settings are

displayed.

1~8/A~H AND OUT/IN:

Press the OUT button and then the number buttons to select the required Output ports, and press the IN button

and then a single number button to select the required Input source, finally press the MENU button to confirm the selection.

For Example: If Outputs A~D need to be set to Input 1 and Outputs E~H need to be set to Input 2 then the following sequence of button

presses needed to be performed: PRESS: OUT►A►B►C►D►IN►1►MENU, and then press: OUT►E►F►G►H►IN►2►MENU.

NOTE: If the MENU button is not pressed the selection will not be changed.

OPERATION CONTROLS & FUNCTIONS