- ページ 5
スイッチ A-Neuvideo ANI-88UHDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-Neuvideo ANI-88UHD 16 ページ。 8x8 hdmi 4k uhd matrix w/ hdcp 2.2
ページを印刷する
A
NEUVIDEO
FRONT PANEL
q
LCM:
Displays the setting information of each Input and Output setting.
q
POWER:
Press this button to power the device on/standby. The LED will illuminate green when the power is on, red when it is in
w
'Standby' mode.
LOCK:
Press this button to lock all the buttons on the panel. Press again to unlock. The LED will illuminate orange when locked.
e
IR:
IR Receiver window (accepts the remote control signal of this device only).
r
MENU:
Press this button to access the LCM menu system, from here EDID settings can be managed and the IP system settings are
t
displayed.
1~8/A~H AND OUT/IN:
Press the OUT button and then the number buttons to select the required Output ports, and press the IN button
y
and then a single number button to select the required Input source, finally press the MENU button to confirm the selection.
For Example: If Outputs A~D need to be set to Input 1 and Outputs E~H need to be set to Input 2 then the following sequence of button
presses needed to be performed: PRESS: OUT►A►B►C►D►IN►1►MENU, and then press: OUT►E►F►G►H►IN►2►MENU.
NOTE: If the MENU button is not pressed the selection will not be changed.
OPERATION CONTROLS & FUNCTIONS
w
e
r
3
t
y