AEG 222 D Manuale di installazione e istruzioni per l'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Cappa di ventilazione AEG 222 D. AEG 222 D 20. Fume extractor hood
Anche per AEG 222 D: Manuale di installazione e istruzioni per l'uso (20 pagine), Manuale di installazione e istruzioni per l'uso (20 pagine), Manuale di installazione e istruzioni per l'uso (20 pagine), Manuale di installazione e istruzioni per l'uso (20 pagine)

Maintenance and care

• The hood must always be disconnected from the mains

power supply before beginning any maintenance work.

Opening the grid

• Open the latch L and swing the grille downwards.

— Fig. 6.

• To remove the grid, pull it forwards from the right and

• The purpose of the grease filters is to aspirate grease particles which

form during cooking and it must always be used, either in the external

evacuation or internal recyclingfundion.

Important: the metal grease filters must be removed and

washed, either by hand or in the dishwasher, every four weeks.

Hand washing

Soak grease filters for about one hour in hot water with a grease¬

loosening cleaner, then rinse off thoroughly with hot water. Repeat the

process if necessary. Refit the grease filters when it are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful washing

programme and highest temperature, at least 65°C. Repeatthe

process. Refit the grease filters when it are dry.

Note: when washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact on its

performance.

• Clean the inner housing using a hot detergent solution only (never use

caustic detergents, abrasive powders or brushes).