AEG 222 D 설치 및 운영 지침 매뉴얼 - 페이지 14

{카테고리_이름} AEG 222 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 222 D 20 페이지. Fume extractor hood
AEG 222 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (20 페이지), 설치 및 운영 지침 매뉴얼 (20 페이지), 설치 및 운영 지침 매뉴얼 (20 페이지), 설치 및 운영 지침 매뉴얼 (20 페이지)

Maintenance and care

• The hood must always be disconnected from the mains

power supply before beginning any maintenance work.

Opening the grid

• Open the latch L and swing the grille downwards.

— Fig. 6.

• To remove the grid, pull it forwards from the right and

• The purpose of the grease filters is to aspirate grease particles which

form during cooking and it must always be used, either in the external

evacuation or internal recyclingfundion.

Important: the metal grease filters must be removed and

washed, either by hand or in the dishwasher, every four weeks.

Hand washing

Soak grease filters for about one hour in hot water with a grease¬

loosening cleaner, then rinse off thoroughly with hot water. Repeat the

process if necessary. Refit the grease filters when it are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful washing

programme and highest temperature, at least 65°C. Repeatthe

process. Refit the grease filters when it are dry.

Note: when washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact on its

performance.

• Clean the inner housing using a hot detergent solution only (never use

caustic detergents, abrasive powders or brushes).